Showing posts with label speaker system buzzing. Show all posts
Showing posts with label speaker system buzzing. Show all posts

Thursday, February 6, 2014

New logictech z623 2.1 speaker system buzzing!?!?




Tyler


I just got the logictech z623 2.1 speaker system and when I hooked it all up and turned it on it started to buzz! I did nothing to them, I just hooked them up and played it. What can I do to try and fix the problem? Thanks in advance.


Answer
Try connecting it to a music player such as a phone or the like. If the buzzing sound continues on a battery operated source, the speakers are defective.

why does my computer's system speaker continuosly buzz?




okka01


it buzzes most of the time the pc is running
i am running windows 7 ultimate
custom built pc with
gigabyte mother board
core 2duo
4 gb RAM
256 nvidea geforce VGA

i have unplugged the system speaker
the tiny speaker inside the case (directly connected to the mother board)
the tiny speaker inside the case (directly connected to the mother board)
the tiny speaker inside the case (directly connected to the mother board)



Answer
Must be a fault somewhere or could be something interfering with it... maybe hard drive too close...

I presume its the new type that is built no the board not the old fasioned big speaker....

could be a motherboard fault... depends on a lot of things... like does it so it before you even get in to windows




Powered by Yahoo! Answers

Monday, January 27, 2014

How do I connect my laptop to external self powered speakers?

speaker system buzzing
 on PopScreen - Video Search, Bookmarking and Discovery Engine
speaker system buzzing image



Tschuler


I am trying to connect my laptop to some external logitech self powered speakers. I'm runing a standard minijack audio cord from my laptops headphone out to my external speaker systems audio input in and as soon as I plug it in I hear a loud buzzing noise comeing from all speakers.
Do I need to change a setting from digital to analog or buy a converter? or what?



Answer
the minijacks are either not proper connected, the cord is broken or the jacks have no clean contacts. i've noticed the same sometimes on my laptop speakers, but after deconnect and reconnect the jacks the buzzing noise disappeared.

Speaker makes buzzing sound when i turn it on?




Shotthruth


This is a two speaker set from genius bought during 2003ish.... worked fine...until suddenly it started to make a buzzing sound like a tv on static...

On another note, please dont tell me to replace it.... i will prolly end up doing it but wud like to see if i can solve this problem...i do have two other sound hi fi systems but those are connected to my home theatre....(which is kind of a family thing since we watch movies on it together).... For my pc, i prefer using two speaker systems coz it doesnt disturb other people of the household....



Answer
Okay, first, be sure it is your speaker. Haul the buzzing unit out to another hi fi system and hook it up. If the buzz is still there, it is for certain the speaker, not the wiring shorting out or the amp you had it hooked to. Lets say it is the speaker once you test it. generally this would mean a bad driver. You can check this if the drivers are cones, by gently puting your hand on each one in turn, and finding the one that is causing the buzz. If you have muffled a buzz, you may have your hand on the problem. listen close by putting your ear at each driver, to make sure the odd sound isn't pervasive. although the sound will travel through the box, you should be able to discern weather the driver itself is stroking out, or if the sound is just penetrating the box from elsewhere. There are obviously other ways of doing this if you are handy, and you will have to be to fix it anyway, because the solution is going to require you to unscrew and remove the bad speaker cone and replace it. You can check the wire connections to the bad sounding cone while your fiddling around in the box, maybe a connector came loose and that is causing the problem. as long as your head is inside the box, look at the crossover. most speakers have a capacitor or two that shoves the right sound to the right cone. better ones also have a microhenry coil to keep signals that are to high from invading your bass driver (the biggest cone) . a bad cap will look a bit bloated up, bulged out, or even blown up and leaking. the coil is usually just a coil of wire wrapped around a form, or an iorn core. if any of that stuff looks funny to you, jot down the the millihenry rating of the coil, or the microfarad rating of the cap, and get ye to radioshack and get new ones to solder in. If it is one of the drivers (the speaker cone assemblies) ,try to get a good match, usually from a online replacement part supplier. youll want one of the same ohm rating, with the same fs number etc. the same free air resonance, and about the same magnet size, at the very least. As not all this info is on the cone (driver), your best bet is to ask for the replacement speaker by model , size, manufacturer, so forth. There are ways to get the info sheets for the speakers, or test them for the three vial numbers that mean you have a good match, but you are not going there, so just ask. if your luck holds, a replacement will get found. But lets say the speaker works fine connected to a second system. Check you speaker wires right from the terminals all the way to the speaker connectors the connections should be solid , unfrayed, and not touching each other. there should be no breaks in the run of the wires. Onto your amp, then. Same principle here. connect a known good speaker to the amp, and see if it goes funny. Keep the volume low, and your hand on the off switch though, just in case its worse than you think. If it is the amplifier (receiver, all in one dvd playing box, whatever it is you have. try several sources, another words try the radio, then the dvd or cd or tape source, whatever. So now you know. Hey, the unit's radio is bad, the unit's tape player is bad, the dvd isnt working right, nothing works right, must just be the amp itself. Now do you fix the amp or replace it? repairs are usually expensive, you will find. It will be cheaper because you can now define for the repair person that it seems to involve the radio,or the dvd, or everything, but you will not like the estimate. Even if it was a speaker cone that needed to go, unless the unit takes a dirt cheap replacement, and you can do it yourself, you may not be camping happy.. Chances are, you are going to go out and just get something that works instead, but these are the basics, whew... .




Powered by Yahoo! Answers

Sunday, November 24, 2013

when playing a DVD i get a louder buzz when there is a lot of white or lighter color on the screen. Fix?

speaker system buzzing
 on If your car speaker are making a buzzing noise, when you play music ...
speaker system buzzing image



Ol' Ray


the TV is a 30" Toshiba Hi-Def and a Pioneer DVD player. The hum or buzz gets loud if there is a lot of white in the picture, and also if there is a lot of light blue or other light colors. I have a Durabrand theater speaker system, but the noise is there even if we're not using those spakers.


Answer
Are you using the composite (yellow) video input on the TV? If so, the video is getting into the audio signals. I had a TV do that because one of the circuits was going bad. Try just unplugging the video connection at the TV. If the noise goes away, then it is the video causing the problem.

With HD, you should use >>component<< (red/green/blue) inputs with proper cables for the video and you'll still need the red/white audio connections as well. The picture will be much better and have much better isolation from the audio signals.

Better still would be the HDMI connection, but not all players have those, and some aren't compatible. Easiest thing to do would be to go with the component inputs on the TV.

Also, make sure the TV and player are plugged into the same wall outlet. Sometimes using different wall outlets can cause problems.

How do I connect my laptop to external self powered speakers?




Tschuler


I am trying to connect my laptop to some external logitech self powered speakers. I'm runing a standard minijack audio cord from my laptops headphone out to my external speaker systems audio input in and as soon as I plug it in I hear a loud buzzing noise comeing from all speakers.
Do I need to change a setting from digital to analog or buy a converter? or what?



Answer
the minijacks are either not proper connected, the cord is broken or the jacks have no clean contacts. i've noticed the same sometimes on my laptop speakers, but after deconnect and reconnect the jacks the buzzing noise disappeared.




Powered by Yahoo! Answers