Showing posts with label best high end component speaker system. Show all posts
Showing posts with label best high end component speaker system. Show all posts

Friday, February 14, 2014

whats a good high end sound system for a car?




XxMeTaL_Bm


I'm not smart when it comes to car audio so can someone please recommend me a good high end sound system setup for a lexus is300...i already know the head unit i want so can someone please just recomend a good system involving 2 12" subwoofers an amp and a speaker system....im looking for a good clean crisp sound but still has a good punch when it comes to bass...thankyou in advance


Answer
It really depends on what you call high end. That could be talking about FOCAL, which range in price range from a decent price to WTF (meaning they have speakers that are over $4K per set). But for sound quality, I would suggest looking into Polk Audio MM6501 series. For the sub stage look into Orion HCCA series, this is a true competition sub.
The amp for the speakers I would suggest Rockford Fosgate PRIME R300-4, and the amp for the sub stage I would suggest Hifonics Brutus BRZ2400.1D, this amp would do great with the Orion HCCA series sub.
Prices:
Rockford Fosgate PRIME R300-4 $140.00 (found at www.sonicelectronix.com)
Hifonics Brutus BRZ2400.1 $400.00 (found at www.sonicelectronix.com)
Polk Audion MM6501 6 1/2" components $200.00 - coaxial MM651 $120.00 (found at www.sonicelectronix.com)
Orion HCCA 12.2 (you will not need any more than just 1 of these subs, Sonic Electronix used to have them in stock but no longer in stock, if you google this you will be able to find them for under $500 each. The enclosure for this sub needs to be made from 1" MDF, any less and the sub will destroy the enclosure. I had an enclosure made from 5/8" MDF and the enclosure literally fell apart.

How do you build a high end home speaker cross over?




Darren


Wanting to make my own crossovers for home speakers.


Answer
When it comes to designing and constructing the highest performance passive multiway crossover networks it is ABSOLUTELY ESSENTIAL that the designer utilize the complete complex transfer function, as precisely and accurately as possible, for each of the transducers being used in the loudspeaker. Failure to do so would fall far short of what one would truly justify as âhigh endâ or high performance. Without question, the best, most effective and efficient approach is to use crossover design software to synthesize, optimize and model your crossover network designs; an excellent investment if you will be (or expect to be) heavily involved in designing and building high performance loudspeakers. Through an iterative process such software will generate a complete schematic including individual component values from which you produce the component layout for use with either point-to-point or printed circuit board construction.

In addition, in order to achieve the most accurate modeling and synthesis you need to use a loudspeaker measurement system to measure the transducers you will be using (in their enclosures where applicable and after lengthy break-in) and export the measurement data from the measurement system directly into the crossover network design software running on your computer. Though using the measurement system is the best approach to achieving an optimal crossover design it is by no means a necessity - but highly recommended nonetheless. If you choose to use the combined approach then you need to make sure that the measurement system is compatible with and/or specifically supported by the crossover design software.

When it comes to crossover design software two of the most powerful and popular packages are LEAP (Loudspeaker Enclosure Analysis Program) from LinearX Systems and SoundEasy/EasyLab from Bodzio Software Pty. Ltd. With respect to third-party professional loudspeaker measurement systems there are many from which to choose. You would need to determine which will best serve your needs and fits within your financial budget. Links to the Websites for both companies can be found in the Google Docs resource listed below.

That said, there is a third, less desirable option if youâre prepared to compromise a little by foregoing the opportunity to fully maximize your loudspeaker crossover/system optimization in an effort to reduce the your short-term costs: you can, depending on the drive units (and enclosure) that youâre using, use the Leap Crossover Design Service from Madisound Speaker Components. (Madisound is not the only company to offer such services but they are the first that comes to mind.) Again, you will find a hyperlink to relevant Madisound Webpage in the Google Docs resource below.

Randomly combining preassembled crossovers with assorted drive-units is not a recipe for success IF you are truly after a high performance (or âhigh endâ) loudspeaker. On the other hand if you purchase a complete turnkey loudspeaker kit, i.e., drivers and crossover â with or without a loudspeaker enclosure, then you have a much better possibility of constructing a reasonably high performance loudspeaker; the performance of which will depend largely on the kit design, component quality, construction and the producer of the kit. In other words, if a basic loudspeaker kit is carefully designed using the tools Iâve mentioned above then you are reasonably likely to end-up with a loudspeaker that performs well. This is a good option for a first-time (or one-time) loudspeaker construction project, however I personally find it far more enjoyable and rewarding to design optimized, high performance crossover networks for driver combinations and enclosure designs of my choosing rather than someone elseâs.

I hope you have much success with your loudspeaker design and construction endeavor.


Loudspeaker Design and Construction Resources
(See the section title âDESIGN AND MEASUREMENT - SOFTWARE AND HARDWAREâ)
http://docs.google.com/View?id=dhpmqnbb_8cqqcq2gx
 




Powered by Yahoo! Answers

Saturday, September 14, 2013

How do resistors affect sound quality?

best high end component speaker system
 on Highend Audio Review
best high end component speaker system image



Rah


I've heard to a lot of diy'ers wiring in resistors inline with their high end stereo components to improve the sound quality. What is the point of this?


Answer
Changes the impedance of the output circuit, but I don't know how it could improve sound if the speakers are properly matched. If anything, it would reduce volume, and maybe bass and treble response somewhat. It does reduce the effective wattage output, and if the system is not properly matched, that may reduce distortion.

How should I install a custom 9 speaker sound system in a car?




IT's ME


I will be adding 4" speakers on the dash and 6 1/2" speakers in kick panels up front. The car is a 2002 Pontiac Sunfire & it has 4x6" speakers in the front door and 6x9" speakers in the rear deck.

Here is what I plan on purchasing:
Head Unit - Kenwood DPX300U $115, 3 sets of 2v per amp outputs, 22 Watts RMS x 4
Dash - Alpine Type-S SPS-410 $40, 4" 2-Way Coaxial Speakers, 45 Watts RMS
Door - Alpine Type-S SPS-406 $50, 4x6" 2-Way Coaxial Speaker, 45 Watts RMS
Kick Panel - Alpine Type-S SPS-610C $75, 6 1/2", 2-Way Component Speaker, 80 Watts RMS
Rear Deck - Alpine Type-S SPS-619 $75, 6x9" 3-Way Coaxial Speaker, 85 Watts RMS
Subwoofer - Alpine Type-S SWS-12D2 $100, 12" Dual 2 Ohm Subwoofer (To be used in 4 Ohm), 500 Watts RMS

I plan on using a single amplifier for this system.
Amplifier - Alpine MRX-V70 $260, 5 Channel, Class D, 60 Watts RMS x 4 Channel + 250 RMS x 1 Channel @ 4 Ohms.

I want to know if this is a waste of money if I am only going for a SQ system. I want to be able to have my music be turned up LOUD & be VERY clear. I really don't want more than 1 Subwoofer because more than one will only lower the SQ imo, but, will the DASH & FRONT DOOR speakers being powered from the head unit lower my SQ or will it add more to the loudness factor? I am also wondering if I should invest in bass blockers and/or baffles for the Dash and Front Door?? Any ideas? Will I need a capacitor for this system? I plan on using high quality speaker wires (rewiring everything) and quality amp kit as well as lots of sound dampening material. Thanks for professional and amateur opinions!
SS - I understand that. The two pair of speakers hooked up the the head unit are rated for a max of 45 watts RMS but will only be getting 22 Watts RMS from the head unit. And the other two pair of speakers are rated at 80 and 85 Watts RMS, but, will only recieve 60 Watts RMS. That much is clear but what my question is... Will having the door speakers and dash speakers hooked up to my head unit (22 watts RMS each) ADD to the DB and SQ of my audio inside (as well as outside) of my car or will the difference in RMS WATTAGE being applied 1) from the head unit 2) the external amp only create a bad sound quality????
Because - If the dash/door speakers don't add crap to the sound in my car I could just not install them and not use the internal amplifier on the head unit.
But - luxury sound systems have 6+ speakers & I know that more cone space(ie speaker size) tend to make them louder. (2 10"s tend to be louder than 1 12" (similar speaker, model and box of course) but will there be a major difference since 4 speakers will be getting 22 watts rms and the other 4 speakers will be getting 60 watts rms............ ugh im confused.
Thank you N2 Audio! I was hoping someone could simplify that for me. That's why I was asking in the first place. I think I may eliminate the rears and go with two pairs of matched component sets up front (kick panel and front door) I need to figure out how to place the speakers in the door so that they are "aimed" correctly. I know the kick panels already are "aimed" that was the reason I got them in the first place. So in the front I wont notice there are no rear speakers with two sets? and I will continue to keep the single 12" in a sealed box. thanks



Answer
Sounds like a mess to me.

The most effective way to get good sound quality is with one GOOD pair of front component speakers getting plenty of power and a GOOD subwoofer (or two) in a GOOD box getting plenty of power.
That's really all there is to it.

Adding additional speakers just means a lot of misdirected sound reflecting all over the car.
You can GET SQ with a lot of speakers, but it's a lot of work...imaging/aiming, time alignment, vibration damping etc.

A good pair up front is simple and effective.

Rear fill is considered optional in a basic SQ set up. A lot of people go without rears all together. If you want rear "fill" for back seat passengers (like I do) I'd choose either the deck or door speakers and power them with the head unit.
I use my stock speakers for rear fill (they're acually low power JBL 5x7's) and they work well.

Your plans seem fine in theory, and it's definitely good quality equipment.
I just think you could save some time and money by simplifying and probably end up with better SQ.

Edit:
A stereo sound system is an attempt to create the sound of live music.
The band plays on the stage in front of you right?
Rear speakers aren't needed to produce the "image" of a band on stage.




Powered by Yahoo! Answers