Wednesday, July 3, 2013

2006 Jeep Wrangler Unlimited speaker system upgrade suggestions?

speaker system for jeep
 on Track Arm Bushings, Front or rear by Prothane @ The Your Auto World ...
speaker system for jeep image






Hi I have a 2006 Jeep Wrangler Unlimited and I was wondering what good speakers could I put in. I don't want anything to to expensive but I'll pay for good quality speakers. I have the 4 speaker system. Should I modify the speakers mount to hold bigger speakers. I am not looking for too much bass but I like bass also the sound quality. When I'm driving down the highway it sounds horrible. Also I want I try to keep the factory headunit. And also would it be good to put a small amp to power the speakers. Thanks


Answer
whenever i get a new car my upgrade process goes :
big 4ch amp --> sound deadener --> headunit --> sub --> front speakers

ill power the front 2 speakers off of 2 channels of the amp and leave the rear speakers un amplified. i'll use the other 2 channels for a sub when i get one.

then ill make sure nothing rattles, you probably get a lot of road noise on the highway? a properly deadened vehicle is pretty close to silent at speed. http://www.sounddeadenershowdown.com read for an hour or so. i usually only "cld" or dynamat and skip the mlv and ccf but you may want to look into it because of your noise issue.

ill skip the headunit part cause you don't want one

next ill add a sub. you can't have a decent sounding system without a sub. I'm not talking some monstrous beast of a sub, just a 8-12 inch 300- 500 watt rms subwoofer in a sealed box.

finally i'll add some speakers. i usually need them at this point beacause my stockers have been blown to absolute hell by a ridiculously overpowered amplifier. i usually choose a home audio speaker from parts-express.com with and make sure it's an alright fit for my amp and also make sure it has really low inductance, which effects how "punchy" the bass is. for simplicity's sake, ill just recommend a component set. i'll do up a mock system for you:

http://www.onlinecarstereo.com/CarAudio/p_20406_Soundstream_RUB5800.aspx
found this nice 5 channel amp, you can run all your speakers (front and rear) and a sub off this

http://www.onlinecarstereo.com/CarAudio/p_12655_Dynamat_10455.aspx
can be found a lot cheaper on ebay

http://www.sonicelectronix.com/item_18896_Infinity-Reference-860W.html
good little sub at a good price

http://www.sonicelectronix.com/item_12260_JBL-P660C.html
front speakers, not sure what size speaker your jeep is, i guessed at 6.5

with that amp you can add an amplified set to the rear aswell, go coax for a budget speaker, go component if you will have lots of people in the back and can spare the cash.

email me through yahoo if you have any questions, just click my name and send me an email!

What kind of audio wire should i buy for my jeep?




jeff


Bought a 2001 jeep and want good sound quality for my speaker system. I have a kicker 12" a ported box, and a 250 kicker amp. What gauge and type wire should i buy for prime sound quality?


Answer
If you want the best quality make sure you get the OEM wiring.




Powered by Yahoo! Answers

How to change a Passive Subwoofer to a Powered subwoofer in a Phillips Home Theater System?

speaker system 1000 watt
 on Sony BDVE780W 3D Blu-Ray Home Theater System, 1000 Watts, Built-In Wi ...
speaker system 1000 watt image



Reis


I currently have a 1000 watt Phillips home theater system and would like to get rid of the passive subwoofer and put in a powered subwoofer. The phillips system does not have component audio outputs. It only has the two small speaker wires that go to the subwoofer. Please let me know how I can hook up a powered subwoofer to this system.


Answer
As others have said you can't do much to an all-in-one system ... and changing to a powered subwoofer won't do anything for the midrange and treble, or for the power/loudness. So making the change you propose is questionable at best (You would be wiser to buy a better system)

That said, the other answers saying you can't change to a powered subwoofer are (probably ... it depends if the system is sending full spectrum sound to the main speakers) WRONG. If the powered sub has speaker input terminals (in addition to RCA input(s)) you can. These usually take the form of two sets of speaker input terminals (left and right), and two output terminals (left and right). The sub has a crossover built in, and by running the wires from your HT for the right an left front speakers to the sub, and then new wires from the left and right output terminals on the sub to the right and left front speakers (being careful to respect polarity to maintain phasing) you can get the powered sub to work. In essence the full range audio goes to the sub crossover, the bass notes are split off to the sub amplifier and from there to the sub speaker, and the mid and treble notes are sent on to the front right and left speakers. See the link for a picture of a typical sub interface panel.

Note that you need to make sure the HT is sending full frequency sound to the front speakers (use the "Large" option if there is one in the speaker setup). Your system probably doesn't have this setting, but more than likely you are getting bass sent to the main speakers and the above will work. If it doesn't you can either return the sub or use it with a new upgraded system (your best choice anyway).

Next time provide details of model not just brand!

Hope that helps.

How to change a Passive Subwoofer to a Powered subwoofer in a Phillips Home Theater System?




bilmer_56


I currently have a 1000 watt Phillips home theater system and would like to get rid of the passive subwoofer and put in a powered subwoofer. The phillips system does not have component audio outputs. It only has the two small speaker wires that go to the subwoofer. Please let me know how I can hook up a powered subwoofer to this system.


Answer
Unfortunately, many HTIB systems and other similar home theater package systems just don't give you the flexibility that a modular system would give -the price you pay for budget-minded convenience. However, you should have an AUX OUT or an alternative AUDIO OUT that you may use as a SUB OUT. Even the CENTER OUT would work if you have one on your HTS.

Or, as a couple of options, you could either get a higher efficiency/performance passive sub if you just need more performance, or add a subwoofer amplifier to your existing sub.

I have some recommendations for excellent examples of powered (and greater performance passive) subwoofers at different price levels for you to put on your short list...

Happy listening!




Powered by Yahoo! Answers